UVdphantSYRV0c3DdGJQqp4t_qs FansEdges: 2012

Tuesday, December 4, 2012


Military GIS – Uses

1.       Operation Planning.          Military needs maps for planning of different operations within its operational command and each requirement is to cater for a specific operation. The digital base in GIS environment facilitates the creation of different types of maps to meet specific op needs without clustering with unwanted details. This facilitates the viewing of spatial information on need to know basis either at command headquarters or in the field area.

2.       Border Security.     GIS technique allows for large volume of cartographic and thematic info to be integrated into a single system thus creating a coordinated digital structure for data analysis. This opens new and effective ways of arranging and presenting data in spatial form, which is key to enhancing the quality of planning and conducting security operations. This sets GIS apart from other information systems, ensuring unique opportunities for applying them in dealing with a broad range of tasks of border security forces involved in planning and conducting security ops.
3.       Internal Security.    Today we are living in the world where the armed forces cannot separate themselves from the incidents happening in the country and they have to work in hand to hand with other agencies to fight against the forces working against the security of the nation. Agencies should able to coordinate their activities to be able to respond to any threats to the internal security. Digitized maps using specific overlays could provide immense decision making tools to collect collate and analyze info comprehensively. For urban areas, information such as population density, crowd patterns, road density, emergency services and demographic pattern are very crucial in deployment of critical resources in case of a terrorist attack. GIS can assist in generating 3D views and fly through models, sit updates in real time by employing UAVs/ other aerial sensors which will come in handy to brief the per dealing with crisis.

4.       Log Management. GIS plays an important role in military log because it helps in moving supplies, equipment, and troops where they are needed at the right time and place. By using GIS in determining routes for convoys, forces are able to determine alternative routes if mishaps or traffic jams occur on the most direct route.

5.       Personal Information.       One of the most impotent formations of GIS along with satellite imagery is to understand and interpret terrain, which is a major role in determining how troops can be deployed in the quickest and most effective way. Understanding the landscape is especially useful because a military leader can determine strategic/tactical personals, such as ideal locations for scouting parties, best line of sight/fire and also the ability to hide troops and equipment.

Sunday, November 25, 2012


History of Cartography

Map making start in ancient Babylonia people and it made by clay tablet. China is thefirst to make maps in Asia. They drown lines similar to latitude and longitude. Greek peoples more advance in map making and using compose. They discover the world spherical shape, poles, equator and tropics. In 4th BC Pythagoras discover the world is round and Aristotle conform it.
Pythagoras


Aristotle

Eratosthenes was a Greek mathematician, geographer and astronomer in 276 BC-194 BC. He Measure and compute the size of the Earth. The distance between the cities was known from caravan travelling to be about 5,000 stadia. He established a final value of 700 stadia per degree, which implies a circumference of 252,000 stadia.( http://www.juliantrubin.com/bigten/eratosthenes.html)

Clavdii ptole in 168 – 90 BC mapped the whole world and it is the first Atlas book with 26 world maps.

Mercator Projection
Mercator Projection was discover by Gerard de Mercator in 1512 – 1584. He is the father of Map in Duch. http://en.wikipedia.org/wiki/Gerardus_Mercator


In 17 century France Science Academy discover the latitude. In 18 century due to Trigonometry, Plane table method accurate data was gathered. In 1801 first 1: 63,360 maps were printed. 20 century Arial photography introduce to the world. 







Tuesday, November 13, 2012


Calculating Area, Perimeter, and Length in ArcGIS 10

In ArcGIS if you happened to calculate any Area or perimeter, it very easy to calculate the area and perimeter for polygon features and the length for line features. This is accomplished using the Calculate Geometry function in an attribute table.
-          Open ArcGIS 10 and start your project.
-          Open the layer’s attribute table.
-          Go to left corner of the attribute table and choose add field.

-          Right-click on the name of the attribute in question (e.g., Area) and choose Calculate Geometry


-          Choose the layer you want to calculate, coordinate system and the units. Then press OK.

-          Do the same for any other fields for necessary calculations (length, perimeter)







Thursday, July 19, 2012


Colours of light

           In 1666 Newton made one of his greatest discoveries; he found that sunlight (white light) was made up of many different colours. Newton records that one day he noticed sunlight streaming through a hole H in a shutter, and placed a glass prism P in the path of the light to observe what would happen. To his great surprise a number of differently coloured images were obtained on a screen S placed behind the prism. 

         He immediately experimented further to find out whether the colouring was imposed on the white light by the prism, or whether the colouring was inherent in the white light itself. He led to the conclusion that white light contains a mixture of colours which are red, orange, yellow, green, blue, indigo, and violet.


Tuesday, July 17, 2012


ROTATION OF THE EARTH

GENERAL

1.         Although the earth rotates at a constant rate, the correction for rotation varies with a number of factors and, therefore, rotation is more readily considered a non-standard condition. Factors influencing the effect of rotation of the earth on the travel of a projectile are:

a. direction of fire,
b. A/D,
c. velocity of projectile,
d. range to target, and
e. latitude of the gun.

2.         The correction tables provide all the data needed to compensate for rotation in the
gunnery problem, however, some background theory of rotational effects may assist in an
understanding of their application.


Rotational Effects on Range x

3.         Because of rotation of the earth, a point on the equator has an eastward linear velocity of approximately 457 m/s. This linear velocity decreases to zero at either pole. Consider a gun on the equator firing due east at a target (Example 1, Figure x). During TOF of the projectile, the gun and target will travel from G to G' and T to T', respectively, along the circumference of the earth. The projectile, however, travels in a vertical plane, the base of which is parallel to the original plane of departure established at the time of firing; that is, it is pivotal to the circumference of the earth at the gun but not at the target. At the end of a given TOF, the projectile will be at P' when the target is at T'. Hence, the projectile will continue along an extended trajectory and land farther east or, in this instance, beyond its target. The normal trajectory of the projectile is interrupted.

4.         Consider the same gun firing westward (Example 2, Figure x). Again, the projectile falls to the east of the target, but in this instance east is short. The effect in each example is as if the QE fired has been in error by the amount of angle "a", which is the angle formed by the base line G' P' and a tangent to the earth at G'. When the gun is firing eastward, angle "a" is plus (range long); when the gun is firing westward, angle "a" is minus (range short).

5.         A second effect on range is known as projectile lag. This is best explained by use of a diagram (see Figure xx). Assume that a projectile is fired straight up into the air, ie at an A/D of 1 600 mils. When the projectile is fired, it will have a horizontal velocity equal to the rotational velocity of the earth. During the time that the projectile is in flight the earth rotates moving the gun from G to G' and the projectile moves through an arc P to P'. As this occurs in the same time, and the horizontal velocity of the gun and projectile are the same, distance G to G' equals distance P to P'. However, P to P' is further away from the centre of the earth and the angle subtended is less, therefore, the round lands at "X". Furthermore, the effect of gravity on the projectile is acting through the centre of the earth causing the projectile to lag.

6.         Tabular Firing Tables list a single range correction for rotation of the earth that combines the rotation effect and the lag effect. These two effects are opposing and they reach their maximum values at different angles of departure as follows:

a. At an A/D of approximately 530 mils the rotation effect reaches its maximum.

b. At an A/D of approximately 1 070 mils the two effects are equal and cancel each other.

c. At an A/D of 1 600 mils, the effect of projectile lag reaches its maximum.
Projectile Lag
Figure xx

7.         A third consideration is the curvature effect. Curvature effect exists because of the use of a map range for which the surface of the earth is assumed to be flat, but the actual range is measured on a sphere. The gun-target (GT) range is computed for a plane tangent to the surface of the earth at the gun. When the projectile reaches this range, it is still above the curved surface of the earth and will continue to drop, resulting in a slightly longer true range than desired. This effect is less than 1 meter in 1 000 meters [1] and is of little significance except at very long ranges. It is disregarded when FTs are used, since FT ranges include curvature effect.

ROTATION EFFECTS ON BEARING

8.         A final rotational effect is described as the latitudinal effect. When the gun and target are at different latitudes, the eastward rotational velocity imparted to the projectile and target is different. For example, if the gun is nearer the equator, the projectile will travel faster and, therefore, further to the east than the target (see Example 1, Figure xxx). The reverse is true if the target is nearer the equator.

9.          When the gun and target are at the same latitude the projectile will also be deflected away from the target. This is because the projectile tends to travel in the plane of the great circle containing the gun and the target at the time of firing. Because of the rotation of the earth, this great circle plane is continually changing with respect to its original position. As viewed from above, it would appear that the great circle containing the gun and target is turning with respect to the great circle followed by the projectile (see Example 2, Figure xxx). In the northern hemisphere the latitudinal effect is to the right; in the southern hemisphere it is to the left.


REFERENCE

[1]        B-GL-306-004/FP-001, Field Artillery, Volume 6, Duties at Regimental
Headquarters and the Gun Position;


Glossary

The following symbols and abbreviations are used in this document:

A/D     - angle of departure
MV      - muzzle velocity
m/s       - metres per second
f          - angle of elevation
g          - gravitational force (9.8 m/s2)
Hv          - horizontal component of velocity
Vv          - vertical component of velocity
R         - range to the level point
T          - time of flight to the level point
T          - any given time
h          - projectile height at time t.




Sunday, July 15, 2012


Light Beams and Rays
When we look at an object, some energy passes from it to our eyes and stimulates our sense of vision. The energy which stimulates vision is called light energy, and travels at the enormous speed of 186,000 miles per second in air. Some substances, such as glass, allow a high proportion of light energy to pass through them, and they are known as transparent substances. Substances which completely prevent the light energy from passing through are known as opaque substances.
                Light travels in straight lines, which gives more evidence that light travels in straight line is obtained when sunlight is observed streaming through an opening into a darkened room. The dust particles are then illuminated by the light, and a straight edge is observed at the light boundary. Shadows, too, have sharp edge because light travels in straight line.
                The ray box, the path taken by light is known as a ray. A beam of light is the name given to a collection of rays of light, such as those given out by a lamp, a torch, or a searchlight. The type of beam as shown below;


Pin-hole camera


             A pin-hole camera utilizes the fact that rays of light travel in straight lines. A small pin-hole H is made in one side of a box and an object is situated in front of H. A ray from the top point A of the object then passes straight through H and meet the back of the camera at B. It illustrates other rays from the object passing straight through H, and building up an image of the object at X on the back of the camera. The image is clear one if each point on the object gives rise to one point on X, but this can only happened if the pin-hole is small. A wider hole allows rays from a point such as A on the object to spread over small area round B, thus blurring the image. The pin-hole camera is sometimes preferred to the photographic camera by surveyors, as the lens in the latter may produce distortion when a building, for example, is photographed.

The size of the image


Book – M Nelkon M.Sc.(Lond), A.K.C








Saturday, July 7, 2012


Electromagnetic Spectrum
The electromagnetic spectrum is a range of all electromagnetic waves arranged according to frequency and wavelength. The sun, earth, and other bodies radiate electromagnetic energy of varying wavelengths. Electromagnetic energy passes through space at the speed of light in the form of sine waves. The wavelength is the distance from wavecrest to wavecrest.

Radio: radio stations emit into the air
Microwaves: To learn about the structure of nearby galaxies
Infrared:  Our skin emits infrared light
Visible: This is the part that our eyes see.
Ultraviolet: Sun is a source of ultraviolet radiation and that cause our skin to burn
X-rays: Doctor uses them to look at human bones or teeth.
Gamma-rays: Radioactive materials (some natural and others made by man in things like nuclear power plants)
The micron is the basic unit for measuring the wavelength of electromagnetic waves. The spectrum of waves is divided into sections based on wavelength. The range of visible consists of the narrow portion of the spectrum, from 0.4 microns (blue) to 0.8 microns (red).
Visible light is a very narrow part of the EM spectrum, whereas remote sensing equipment can obtain information from a much greater potion of the spectrum. Each part of the EM spectrum defined in the diagram has particular advantages in remote sensing. Landscape features typically absorb some of the incoming solar radiation and reflect some
The portion depending on the nature of the feature, for example;
 Water absorbs near infrared
 Some features emit their own radiation, such as heat from hot springs, which shows up bright on thermal infrared imagery
Knowing the response of various features under various conditions is important for interpreting remote sensing imagery.

Monday, June 4, 2012


GIS – 2

What is DATA and INFORMATION in GIS

    Many people think of a GIS as a computer mapping system, its functions are broader and more sophisticated than that. A GIS is a database that is specially designed to work with map data.

     For example, consider the accounting department of the local company. They maintain a large computer database of their customers, in which they store the name, address, phone number. This type of data is called as information or spatial data.





Data

Sample site Vegetation Types
1- Red Mangrove
2- Black mangrove
3-Coconut palm
4- Nut palm
5- Lime
6- Papaya
Information and Data
Collective vegetation types area interpretation vegetation zones
1- Red Mangrove
2- Black mangrove
3-Coconut palm
4- nut palm
5- Lime
6- Papaya
Categories

M – Mangrove
P – Palm
F - Fruit


SPATIAL DATA
        A GIS is a database that is specially designed to work with map data. This type of information is called SPATIAL DATA .  The geographic data in a project can consist of LOCATION, SHAPE and SIZE as spatial data and DESCRIPTIONS and ASSOCIATED DATA as nonspatial attributes.
Spatial data is classified as three main types:
  • Point – A point feature is a spot or location that has no physical or actual spatial dimensions, but does have specific location.
  • Line – A line is a one dimensional feature having only length, no width. It has a beginning and an end.
  • Polygon – A polygon is an enclosed area, a 2D feature with at least three sides and that has area and perimeter, such as parcels of land, agricultural field or political districts.





Sunday, June 3, 2012


What is GIS?

GIS stand for Geographic Information System. 

Geographic: The real world; spatial realities.

Information: Data and Information; their meaning and use.

System: Computer technology and its support infrastructure.

DEFINITIONS OF GIS
        A computer based technology and methodology for collection, managing, analyzing, modeling, and presenting geographic data for a wide range of applications.
Advanced computer mapping.

Computerized technology for geographic data.

GIS is a set of computer tools that allows people to work with data that are tied to a particular location.

GIS DESCRIPTION
                Collection 
       
                           Storage and Managing
                                     
                                           Retrieval
                                             
                                                        Conversion
                                                   
                                                                 Analyzing
                                                                                                                                                                                                            Modeling

GIS PROJECT
  
A project usually begins with an assessment of needs. What specific issues must be studied, kind of information is needed to support decision making, what functions must the GIS perform, how long will the project last, who will be using the data.
       Without a realistic idea of what the system must accomplish, it is nearly impossible to design it efficiently. When project developing or modeling raw data is the base data for a project. Once needs are known and any appropriate models have been designed, data collection can begin GIS data are stored as layer. General base layers such as;
  • General Reference Map 
  • Field and GPS data          
  • Remote sensing               
  • Soil Survey report           
  • Descriptive data
After the data are assembled the analysis can begin, which might requir making changes to the model and/or data. Thus the step of model development can result from above data;
              
  • Theme 1:Base Map
  • Theme 2:Land Cover
  • Theme 3:Population
  • Theme 4:Economics

The final result must be checked carefully against reality in order to recognize any shortcomings and provide guidelines for improving future work.

MULTIDISCIPLINARY GIS
It is not just a tool for academic research but functions as a true integrated technology. Phone companies, Banks, Advertising firms, many type of commercial enterprises, emergency services, and many other public and private activities have adopted GIS as a major information and decision-support technology.

APPLICATIONS
GIS work with many different applications, land use planning, environmental management, sociological analysis, business marketing and more.

TECHNOLOGY
Geography , Remote sensing , Demography, Education, Planning , Geology, Engineering , Ecology , Hydrology , Surveying , Archeology, Computer science. 















Monday, May 28, 2012

LOST TIME IS NEVER FOUND AGAIN

24 hours per day
             
                 60 minutes per hour 
                           
                                  60 seconds per minute
                                                   
                                                      "86,400 Seconds"


EVERY SECOND COUNTS
  • Spend every second in an efficient and productive way.
  • If you fail to use the day's deposits, the loss is yours.
BENEFITS OF TIME MANAGEMENT
  • Efficient
  • Successful
  • Strong
OBSTACLES TO EFFECTIVE TIME MANAGEMENT
  •        Too many things at once
  •       Stress and fatigue
  •       All work and no play
  •       Interruptions
  •       More interruptions
  •       Periods of inactivity
 PRIORITIZE YOUR WORK
  • Do
  • Delegate
  • Delay
  • Delete
PRIORITIZE METHOD
  • Address the urgent
  • Accomplish what you can early
  • Attach deadlines to things you delay

EISENHOWER METHOD
TYPE
IMPORTANT
NOT IMPORTANT
URGENT
Done Imm Personally
Delegated
NOT URGENT
Personally Later
Dropped

ABC ANALYSIS
Type
Description
Time to attend
A
Urgent and Important
A day
B
Important but not urgent
A Week
C
Nor Urgent Not Important
A Month

                                                           
LEARN WHEN TO SAY “NO”
  • You can’t do everything
  • Don’t undertake things you can’t complete
  • Remain consistent to your goals      


USE YOUR WAITING TIME   
  • On public transportation                           Correspondence
  • At the doctor’s office
  • Waiting for your bus and train                   Letters or memos
  • In the Mess
  • When you are early                                  Books or tapes